OSHA 10 HR General Industry

Written by


Mid America Instructor

The OSHA 10 Hour training course for general industry is intended to provide students with an overview of the basic health and safety hazards present in the workplace. The OSHA 10 hour general industry training course also provides students with an overview of how the Occupational Safety and Health Administration operates. There are no prerequisites required to take the 10-hour general industry course.

The OSHA 10 hour training course for general industry is based on the OSHA 1910 standards. We also address state-specific OSHA requirements, where applicable. This OSHA 10 training course is designed for workers in most factories and manufacturing operations, health care industries, transportation and warehousing, chemical plants, oil and gas production operations, and service industries.

Mandatory topics include: Introduction to OSHA, Walking and Working Surfaces, Exit Routes, Emergency Action Plans, Fire Prevention and Protection, Electrical, Personal Protective Equipment, Hazard Communication

 

OSHA 501 Trainer Course in Occupational Safety and Health Standards for General Industry

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Credit Awarded: 2.6 CEUs

Prerequisites: Please note you will not be registered for this course until you’ve met the prerequisites: OSHA 511 and five years of general industry safety experience. To have your experience reviewed please login, click the button below to complete the form:

Prior to registration: Please complete our Prerequisite Verification Form and attach a copy of your OSHA 511 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

STUDENTS: YOU WILL NEED YOUR CFR 1910 OSHA STANDARDS FOR GENERAL INDUSTRY BOOK FOR THIS CLASS.

IF YOU NEED TO PURCHASE ONE PLEASE CALL JESSICA @  937-521-1574

THE COST OF THE BOOK IS 35.00 PLUS TAX

OSHA 2255 Principles of Ergonomics *PRIVATE CONTRACT COURSE*

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

infographic of office syndrome ergonomicsThis course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care. Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines. Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.Credit Awarded: 2.5 CEUs

OSHA 502 Update for Construction Industry Outreach Trainers

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes. Minimum student contact hours: 18

Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.

OSHA 503 Update General Industry Outreach Trainers

Written by

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

503 general industryThis course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes. Credit Awarded: 1.8 CEUs

Prerequisites: OSHA #501 Trainers Course in Occupational Safety and Health Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.

OSHA 501 Trainer Course in Occupational Safety and Health Standards for General Industry

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Credit Awarded: 2.6 CEUs

Prerequisites: Please note you will not be registered for this course until you’ve met the prerequisites: OSHA 511 and five years of general industry safety experience. To have your experience reviewed please login, click the button below to complete the form:

Prior to registration: Please complete our Prerequisite Verification Form and attach a copy of your OSHA 511 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

STUDENTS: YOU WILL NEED YOUR CFR 1910 OSHA STANDARDS FOR GENERAL INDUSTRY BOOK FOR THIS CLASS.

IF YOU NEED TO PURCHASE ONE PLEASE CALL JESSICA @  937-521-1574

THE COST OF THE BOOK IS 35.00 PLUS TAX

OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.  Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.  Students are briefed on effective instructional approaches and use of visual aids and handouts.  This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.  Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.  Minimum student contact hours: 26

 

Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.  A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.  Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Prior to registration:  Please complete our Prerequisite Verification Form and attach a copy of your OSHA 510 completion certificate to the form and submit.  A college degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation, in the applicable training area may be substituted for two (2) years of experience.

STUDENTS: YOU WILL NEED YOUR CFR 1926 OSHA STANDARDS FOR CONSTRUCTION BOOK FOR THIS CLASS.

IF YOU NEED TO PURCHASE ONE PLEASE CALL JESSICA @  937-521-1574

THE COST OF THE BOOK IS 30.00 PLUS TAX

OSHA 3085 Principles of Scaffolding

Written by

We're sorry, but all tickets sales have ended because the event is expired.

This course covers the requirements for construction and the safe construction and use of scaffolding using the OSHA construction scaffold standard as a guide. Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe scaffolding. Upon course completion students will have the ability to identify the types of scaffolds and their components, determine safe assembly, use, and disassembly, and recognize common violations of OSHA Standards. Minimum student contact hours: 22