OSHA 3085 Principles of Scaffolding

Written by

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

Facilitator

This course covers the requirements for construction and the safe construction and use of scaffolding using the OSHA construction scaffold standard as a guide. Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe scaffolding. Upon course completion students will have the ability to identify the types of scaffolds and their components, determine safe assembly, use, and disassembly, and recognize common violations of OSHA Standards. Minimum student contact hours: 22

OSHA 7405 – Fall Hazard Awareness for the Construction Industry **Free Safety Day Course****

Written by

We're sorry, but all tickets sales have ended because the event is expired.

This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards. Minimum student contact hours: 5

Prerequisites: None

OSHA 7500 – Intro to Safety and Health Management **Free Safety Day Course**

Written by

We're sorry, but all tickets sales have ended because the event is expired.

This course covers the effective implementation of a company’s safety and health management system. The course addresses the four core elements of an effective safety and health management system and those central issues that are critical to each element’s proper management. This course is an interactive training session focusing on class discussion and workshops. Upon course completion students will have the ability to evaluate, develop, and implement an effective safety and health management system for their company. Minimum student contact hours: 5.5

Prerequisites: None

OSHA 30 HR General Industry

Written by

We're sorry, but all tickets sales have ended because the event is expired.

The OSHA 30 hour training course for general industry is designed to help foremen, supervisors, managers, safety committee members, safety staff, and others with responsibility for workplace safety get up to speed on the basics of general health and safety regulations for their workplace. The OSHA 30 hour general industry training course also provides students with an overview of how the Occupational Safety and Health Administration operates. There are no prerequisites required to take the 30-hour general industry course.

The OSHA 30 hour training course for general industry is based on the federal OSHA 1910 general industry regulations. This OSHA 30 general industry training course is intended for operations such as factories and most other manufacturing sites, healthcare providers, warehousing and logistics operations, oil and gas production and refinery sites, and service industries.

The following topics are covered in the OSHA 30 HR general industry: Introduction to OSHA, Managing Safety and Health, Walking and Working Surfaces, Exit Routes, Emergency Action Plans, Fire Prevention and Protection, Electrical, Personal Protective Equipment, Materials Handling,  Hazard Communication, Hazardous Materials, Permit Required Confined Spaces, Lockout/Tagout, Machine Guarding, Welding, Cutting, an Brazing, Introduction to Industrial Hygiene, Respiratory Protection, Industrial Noise and Hearing Conservation, Bloodborne Pathogens, Ergonomics, Fall Protection, Safety and Health Programs, and Powered Industrial Truck.

 

OSHA 10 HR General Industry

Written by

We're sorry, but all tickets sales have ended because the event is expired.

The OSHA 10 Hour training course for general industry is intended to provide students with an overview of the basic health and safety hazards present in the workplace. The OSHA 10 hour general industry training course also provides students with an overview of how the Occupational Safety and Health Administration operates. There are no prerequisites required to take the 10-hour general industry course.

The OSHA 10 hour training course for general industry is based on the OSHA 1910 standards. We also address state-specific OSHA requirements, where applicable. This OSHA 10 training course is designed for workers in most factories and manufacturing operations, health care industries, transportation and warehousing, chemical plants, oil and gas production operations, and service industries.

Mandatory topics include: Introduction to OSHA, Walking and Working Surfaces, Exit Routes, Emergency Action Plans, Fire Prevention and Protection, Electrical, Personal Protective Equipment, Hazard Communication

 

OSHA 511 Occupational Safety and Health Standards for General Industry

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

Minimum student contact hours: 26

Prerequisites: None

OSHA 503 Update General Industry Outreach Trainers

Written by

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

Facilitator

503 general industryThis course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes. Credit Awarded: 1.8 CEUs

Prerequisites: OSHA #501 Trainers Course in Occupational Safety and Health Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.

OSHA 502 Update for Construction Industry Outreach Trainers

Written by

Event Phone: 937-521-1574

We're sorry, but all tickets sales have ended because the event is expired.

Mid America Instructor

Facilitator

This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes. Minimum student contact hours: 18

Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status.

Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.